Meltblown Non-Bonded pads in Chemical: 380XMBYP

Meltblown | Chemical | Pads | Non-Bonded Basis weight: 380 gsm*
Base Fiber: Polypropylene

With a fabric weight of 380 gsm there are 100 pads in the bale, which is half the number when compared to the light weight 190 gsm 200 pad count version, and as a result offers a much heavier per square meter product.

The lack of sonic welds makes these pads more prone to short, fie fires separating from the surface but is usually more absorbent when compared to the same sonic bonded pad. The pads are made in a high visibility yellow which helps identify it for use in aggressive or unknown spill cleanup situations.

Each pad is 40 cm wide by 50 cm long and is made from a single layer of meltblown fires. The pads can be supplied in either a rigid cardboard box or a clear plastic bag.

Key features
· High visibility yellow
· The pad is made from a single layer of meltblown.
· Made from high quality polypropylene.

Application
All meltblown has the same chemical resistance but use Chemical (yellow) when high visibility is a criteria. Great care should be taken when cleaning up aggressive ounknown spills and protective equipment should be worn.
Notes
· Fire retardant as per ASTM 726.
· Ensure that disposal of these sorbents complies with all relevant national regulations and guidelines.

20 Spun-bond Socks in Chemical: 20YS8120-SB

Socks | Spun-bond | Flake | Chemical

Base Fibre: Super Absorbent Flake

These socks are 1.2 meters in length and eight centimeters in diameter. There are 20 socks in thebranded cardboard box. The socks feature a spunbond outer sleeve that has a durable heat sealedseam running its entire length. This tube is thenfiled with a next generation absorbent core thatwill absorb both oil-based and water-based flids.The absorbent core is secured into the sleeve ateach end with a durable plastic clip.Chemical socks are designed to contain smallhazardous, toxic or unknown based spills. Theyare an excellent product for placing aroundmachinery or in workshop areas to prevent leaksor spills from spreading. These socks are also a keycomponent in any spill kit.

Key features
· Will not become slippery even when fully saturated. Contains no poly-acrylate.
· No lint spun-bond outer sleeve.
· Contains 95% recycled content.
· Contains proprietary Super Absorbent Flake.
· 50% more absorbent than most competitor socks.
· Absorbs more and can stay on the job for longer which reduces costs
Notes
· Fire retardant as per ASTM 726.
· Ensure that disposal of these sorbents complies with all regulations.

Pillow in Chemical: 10YPILL 4050

Pillow | Chemical
Base Fibre: Super Absorbent Flake

These pillows feature a spun-bond outersurface that is both fast wicking and tough. This pocket of fabric is then filedwith a next generation absorbent core that will absorb both oil-based and waterbased hazardous or unknown flids. The absorbent core is secured into the pillowshape at each end with a stitched seam.A unique feature of these pillows is theirability to contain large quantities of liquids once absorbed. They are an excellentproduct for placing under machinery or in workshop areas to prevent leaks or spills from spreading.There are 10 pillows each measuring 40 cmwide by 50 cm long supplied in a brandedcardboard box.

Key features
· Will not become slippery even when fully saturated. Contains no poly-acrylate.
· Strong spun-bond polypropylene outer fabric.
· Features a super absorbent flke core.
· Highly flexible pillow fits in tight spaces.
· Large surface area and absorbent contents soak up larger spills.

Notes
· Fire retardant as per ASTM 726
· Avoid high-heat applications
· Ensure that disposal of these sorbents complies with all regulations

Meltblown Non-Bonded Roll in Chemical: 190MBYR

Meltblown | Chemical | Roll | Non-Bonded
Basis weight: 190 gsm*
Base Fibre: Polypropylene

With a fabric weight of 190 gsm this roll a- 92 meters long, is twice the length when compared to the heavier weight 380 gsm46 meter long version, and as a results offers a fabric with the lowest cost persquare meter.

The lack of sonic welds makes this roll is as strong and more prone to short, fie fires separating from the surface than itsbonded equivalent. The roll is made from a single layer of meltblown and is usuallymore absorbent when compared to the same sonic bonded roll. The roll is made ina high visibility yellow which helps identify it for use in aggressive or unknown spillclear up.

The roll is 76 cm wide by 92 meterslong and is made from a single layer of meltblown fires. The roll can be suppliedin either a rigid cardboard box or a clear plastic bag.

Key features
· High visibility yellow
· Non perforated.
· 92 m (300’) in length
· The roll is made from a single layer of meltblown.
· Made from high quality polypropylene.

Notes
· Fire retardant as per ASTM 726.
· Ensure that disposal of these sorbentscomplies with all relevant national regulations and guidelines.

MeltblownNon-Bondedpads in Oil only: 190XMBWP

Meltblown | Oil only | Pads | Non-Bonded
Basis weight: 190 gsm*
Base Fibre: Polypropylene

With a fabric weight of 190 gsm there are200 pads in the bale, which is twice the number when compared to the heavierweight 380 gsm 100 pad count version, and as a result offers a fabric with the lowestcost per square metre. The lack of sonic welds makes these padsmore prone to short, fie fires separatingfrom the surface but is usually moreabsorbent when compared to the samesonic bonded pad.

Each pad is 40 cm wide by 50 cm long andis made from a single layer of meltblown fires. The pads can be supplied in either arigid cardboard box or a clear plastic bag.

Key features
· The pad is made from one layer ofmeltblown.
· Great value and reliable performance.
· Made from high quality polypropylene.
Notes
· Fire retardant as per ASTM 726
· Ensure that disposal of these sorbentscomplies with all relevant nationalregulations and guidelines.

20 Spun-bond Socks in Oil only: 20WS8120-SB

Socks | Spun-Bond | Oil only
Base Fibre: Meltblown polypropylene
These socks are 1.2 metres in length and eightcentimetres in diameter. There are 20 socks in thebranded cardboard box.

The socks feature a tough spun-bond outer sleevethat has a durable heat sealed seam runningits entire length. This tube is then filed with anabsorbent polypropylene core that is made fromrecycled material. This core will absorb just oilbasedflids. The absorbent core is secured intothe sleeve at each end with a durable metal clip.

The spun-bond outer sleeve makes these socksvery strong even when containing absorbed flid,they are also a ‘no-lint’ product. This mean they will not shed any loose fires. The socks are veryflexible which allows them to conveniently mouton any uneven surfaces.They are an excellent product for placing around leaking machinery or in workshop areas to preventleaks or spills from spreading. These socks are alsoa key component in any spill kit.

Key features
· Strong spun-bond outer sleeve
· Meltblown polypropylene core
· Clipped ends
Notes
· Fire retardant as per ASTM 726.
· Ensure that disposal of these sorbents complieswith all regulations.

4 Strip Fibre Booms in Oil only: 4WSBOOM 133

Boom | Strip Fibre | Oil only
Base Fibre: Meltblown Polypropylene

Strip Fibre Boom is made with strips of meltblownpolypropylene packed into a tough outer netconstruction. This simple construction allowsmore oil and water to penetrate into the coreleaving only oil behind. They are time consumingto make as they must be made by hand howeverthey are the best boom to handle high viscosity oils.The booms are 13cm in diameter and 3m inlength, there are 4 booms contained within theclear plastic bag. Running along the boom’s lengthis a tough nylon rope, there are also high qualityrust proofed metal rings and snap hooks fited.

These enable a number of booms to be fastenedtogether to create a continuous longer length. Thirteen centimetre Strip Fibre Boom isparticularly suited to both fresh water and seawater oil recovery as their ability to absorb verythick cold oils is unrivalled. This is definitely thebest boom to be used in cold water with thick oils.

Key features
· The go to product to absorb high viscosity oils.
· Constructed with single outer mesh to improveoil penetration.
· Strips are long and generally low-lining.
Notes
· Fire retardant as per ASTM 726.
· Ensure that disposal of these sorbents complieswith all regulations.

Pillow in Oil only 10WPILL 4050

Base Fibre: Polypropylene

These Oil only pillows are made from afast spun-bond outer casing that is both stitched and heat sealed to enclose apolypropylene core.Pillows are ideal for absorbing spills orleaks that are too big for a pad or wouldrequire the pad to be replaced with muchgreater frequency. The pillow’s fast-wickinglarge surface area helps reduce absorptiontimes whilst its flexibility makes it easy toinsert into difficult to reach spaces.

There are 10 pillows each measuring 40 cmwide by 50 cm long, supplied in a branded cardboard box.

Key features
· Fast-wicking surface area and highabsorption capacity shortens clean-uptime.
· Large surface area and absorbentcontents soak up larger spills.
· Highly flexible pillow fis in tight spaces.
· Nor recommended for long-term use inwater
Notes
· Fire retardant as per ASTM 726.
· Avoid high-heat applications.
· Ensure that disposal of these sorbents complies with all regulations

Meltblown Non-Bonded Roll in Oil only 190MBWR

Meltblown | Oil only | Roll | Non-Bonded
Basis weight: 190 gsm*
Base Fibre: Polypropylene

With a fabric weight of 190 gsm this roll at92 metres long, is twice the length when compared to the heavier weight 380 gsm46 metre long versions, and as a result offers a fabric with the lowest cost persquare metre.The lack of sonic welds makes this roll notas strong and more prone to short,  fires separating from the surface than itsbonded equivalent. The roll is made froma single layer of meltblown and is usuallymore absorbent when compared to thesame sonic bonded roll.

The roll is 76 cm wide by 92 metreslong and is made from a single layer omeltblownfires. The roll can be suppliedin either a rigid cardboard box or a clearplastic bag.

Key features
· Non-perforated.
· 92 m (300’) in length.
· The roll is made from a single layer of meltblown.
· Good value and reliable performance.
· Made from high quality polypropylene.

Notes
· Fire retardant as per ASTM 726.
· Ensure that disposal of these sorbents complies with all relevant national regulations and guidelines.

Magic Monkey Granules: in Maintenance: MM25

Magic Monkey | Granules | Maintenance
Base Fiber: Mineral

This lightweight, dry, granular sorbent issafe for people, plants, animals, and food processing facilities. The granular sorbentis sprinkled on to the spill which then turns into a solid. The spill can then be easilyswept away with a broom.

Key features
· Absorbs liquids of any viscosity and leavessurfaces clean and dry
· Lightweight even when saturated, makingit less costly to dispose of than heavy granular sorbents
· Safe for people, plants, animals and foodprocessing facilities or surfaces including
concrete, tile and asphalt.

Application
Effective on most types of spills includingoils, fuels, chemicals, paint, antifreeze, bases, bodily flids, non-hydrofloric acids, and many others.

Notes
· DO NOT USE WITH HYDROFLUORIC ACID
· Ensure that disposal of these sorbents complies with all local, state and federal regulations.

Dash Bin 120 Litre Chemical Spill Kit: SK-C 120DASH

Spill kit | 120 Litre | Chemical | Dash Bin/ Absorbency: 120 Litres
A rugged two wheeledhinged lid binThe spill kit is contained in ahighly portable bin and willbe ideal for locations wherea quantity of sorbents needsto be taken to the site of aspill at a moment’s notice. Please note other coloredbins are available subject toorder quantity and own labelbranding can be added subjectto order size. Please contact usfor further details.

This spill kits feature a combination of pads, socks andpillows that will contain and recover a 120 litre spill as well asthe basic equipment needed to handle the cleanup process.These kits can be adapted or have branding added. A furtherselling point of these kits is the ability to put all the baggedsorbents back in the bin for removal.

Please note there is nopersonal protection equipment included in this kit. If this is required please contact us for more details.

60 x Pads:  size 50 cm x 40 cm
The pads in this spill kit aresonic bonded meltblownpolypropylene Chemical. They have excellent wickingproperties with the sonic bondpoints preventing stray firesfrom becoming detached
4 x Pillows: size 23 cm x 38 cm
These pillows feature a spunbond outer surface with asuper absorbent flke core. The next generation absorbentcore will absorb and holdlarge quantities of aggressive,hazardous or unknown flids.
5 x Socks: size 8 cm x 1.2 m
These socks feature a spunbond outer sleeve with adurable heat sealed seam. This tube is then filed with a nextgeneration super absorbentflke core and sealed with a durable plastic clip.
5 x Waste Bags and ties
These are made from a toughgrade of polythene and colored dark blue. There is also a cable tie supplied sothat the waste can be securedsafely. Related PPEs should be plan in kit with customer inputs.

Dash Bin 120 Litre Oil only Spill Kit: SK-O 120DASH

Spill kit | 120 Litre | Oil only | Dash Bin
Absorbency: 120 Litres

A rugged two wheeled,hinged lid binThe spill kit is contained in ahighly portable bin and willbe ideal for locations wherea quantity of sorbents needsto be taken to the site of aspill at a moment’s notice.Please note other coloredbins are available subject toorder quantity and own labelbranding can be added subjectto order size. Please contact usfor further details.

This spill kits feature a combination of pads, socks andpillows that will contain and recover a 120 litre spill as well asthe basic equipment needed to handle the cleanup process.These kits can be adapted or have branding added. A furtherselling point of these kits is the ability to put all the baggedsorbents back in the bin for removal. Please note there is nopersonal protection equipment included in this kit. If this is required please contact us for more details.

60 x Pads: size 50 cm x 40 cm
The pads in this spill kit are Oilonly sonic bonded meltblownpolypropylene. They haveexcellent wicking propertieswith the sonic bond pointspreventing stray fires from becoming detached.
4 x Pillows: size 23 cm x 38 cm
These Oil only pillows aremade from a spun-bond outercasing that is both stitched and heat sealed to enclose arecycled polypropylene core.The surface is fast-wicking sopromotes faster absorption.
5 x Socks: size 8 cm x 1.2 m
Our spun-bond Oil onlysocks are made with a strongspun-bond outer sleeveand a recycled meltblownpolypropylene core, producinga strong no-lint product.
5 x Waste Bags and ties
These are made from a toughgrade of polythene and colored dark blue. There is also a cable tie supplied sothat the waste can be securedsafely. Related PPEs should be plan in kit with customer inputs.

Emergency Lighting: Portable Inflatable Lighting System

Model No. AIT 4500 General: For Temporary & Emergency Illumination Requirement.
Glare Free Light Patented Worldwide On DGS&D  Contract

  • Easy to transport
  • Easy to install in narrow or hard-to-reach spots
  • Works both indoors and outdoors
  • One person can install it in just three minutes
  •  Essential for emergency situations and first responders
  •  In high demand for construction sites to increase site safety

Closed System (L x B x H) 585 x 450 x 520 mm
Tower : Height & Weight 4.5 mts& 45 Kgs
Engine: 4 Stroke
Generator Model Petrol 1200VA (Rated)
Generator Fuel Tank Capacity 8.0 LTRs

Light Source 585 x 450 x 520 mm
Brightness: 4.5 mts& 45 Kgs
Time For Tower Extension 4 Stroke
Time To Pack 4 Minutes
Dimension/Weight Tolerance ± 5%

Present Scenario For Illumination Portable Inflatable Lighting System consists of an inbuilt genset, blowers, lamo. The user has to switch on the generator first, then the blower which inflates the cloth to height of 4.5 meters from ground level. Further when the user switches on the 400W MH lamp it illuminates an area around 10,000 sq. meters within 3 minutes. It gives 360˚ glare free illumination. This lighting system can be placed at Panchayat, Group Panchayat, Block, Tehsil level also Relief Camps such as Schools / Govt. Buildings to illuminate outdoor areas so that relief work can be done during hours.

Dash Bin 120 Litre Chemical Spill Kit

Remote Area Lighting System

Efficiency and Reliability: Our team of dedicated professionals is engaged in the offering Remote Area Lighting System, which is known for its efficiency and reliability.

Features:

  • Easy to install and use
  • Quality assured
  • Seamless finish
  • Low maintenance
  • Easy operation
Specification:

  • All components fold into the watertight case for storage
  • Self-contained can be easily moved around.
  • 24×1/2 light fitting mounted in an aluminum heat sink.
  • The pole extends to a minimum Height of 2 meters.
  • Unit is fully deployed in under 30 seconds
  • In-built Support Legs deployed within seconds (optional)
  • Stainless Steel Support Legs
  • All items are in built inside the case with wheels and extending handle-which makes it easy to transport.
Remote Area Lighting System

Unique Chemical Vapour Neutralizing Technology

Unique Chemical Vapour Neutralizing Technology FAST-ACT skid mounted extraction systems can be designed to suit offshore and onshore applications.
Avoid the need for expensive and time consuming gas venting procedures.
• Advanced H2S Vapour Removal
• Vapour Emission control loading/unloading
• Tank De-Pressuring
• Tank Gas Freeing
• Portable & Skid Mounted
• Lowers OPEX and man hours
Product Benefits:

  • Non-toxic to humans
  •  Insoluble in water
  •  Available in granular or powder form
  •  5 year shelf life
  •  Effective in minutes
  •  Chemical vapours converted to a non-hazardous
  • product for ease of disposal
  •  Organic vapours adsorbed in minutes
  •  IMO/GESAMP approved
  •  Lloyds PVS 1400001 Certified
Key Advantages
• Minimum twice the efficacy of scavengers
• Removes 0.4 -0.6Kg H2S per Kg of granule
• In gas to power sweetening can produce at $0.03/Kwh
• Provides vapour hazmat response in seconds
• Can be used for skin decontamination
• No mixing, non-toxic, 5 year shelf life
• Smaller footprint for engineered vapour solutions
• Lower CAPEX
• Lower OPEX with safer and less changeouts
Chemical Vapour Neutralizing Technology

Lightweight, Non-Pyrotechnic, Utility Launcher

The ResQmax™ is a new generation Line-throwing and Rescue Appliance fueled by compressed air, specifically designed to deploy a Line only, or an Auto-Inflating Sling & retrieval Line to an otherwise inaccessible point in both land-based and maritime environments, providing an emergency response capability without putting the rescuer at risk. The ResQmax is non-pyrotechnic, reusable and refillable, utilizing an air-thrust technology. The ResQmax Launcher is made from high-impact polycarbonate for durability and excellent impact resistance. The ResQmax uses standard Projectiles with service pressure of 3,000 psi / 207 Bar.

Application Areas
• Swift Water Rescue
• Surf Water Rescue
• Ice Rescue
• Man Overboard Rescue
• Ship to Ship & Shore to Shore Line Deployment to cross horizontal obstacles (i.e.) Rivers, Canals, etc.

Lightweight

MAXimum Distance The ResQmax is capable of deploying a Line up to 400 feet / 122meters with the standard Projectile depending on the servicepressure, the weight of the Line, and type of the Projectile used. MAXimum Safety The Safety Mechanism is “always ON,” resetting automaticallywhen a Projectile is inserted.The Projectile’s “push-click” engagement allows easy reloading,even in the dark.A Pressure Relief Assembly prevents unsafe pressure build-upthat could result from exposure of the Projectile to extreme heat.

MAXimum Performance Multi-Shot Capacity – our patented Nozzle Valve permits anynumber of the Projectiles to be precharged and stored with theResQmax, allowing deployment of multiple Projectiles in rapidsuccession.